Продукция

Описание

Название с картинкой и определением

CarboStop U реагирующая с водой однокомпонентная смола, которая при контакте с водой вспенивается и отверждается. Не содержит фтора-хлора-углеводорода и фталатного пластификатора.

Область применения


► Остановка поступления воды (также морской воды)
► упрочнение рыхлых грунтов
► Гидроизоляция при проходке туннелей
► Заделка буровых скважин / герметизация дегазационных скважин

Описание компонентов

CarboStop R U - смола состоящая из модифицированных изоцианатов и добавок.

Основные приемущества


► Высокий фактор вспенивания, в отличие от двухкомпонентных смол материал CarboStop R U отверждается только при контакте с водой
► превосходные склеивающие свойства ко всем видам поверхностей

Принцип действия

CarboStop U нaгнeтaeтcя в вoдoнocныe зoны, чepeз пaкep (инъектор), c пoмoщью pучнoгo нacoca, либо при помощи электрического или пневматического нacoca/ Пpи кoнтaктe c вoдoй cмoлa cильнo вcпeнивaeтcя и зaтвepдeвaeт. Ecли в изoлиpуeмoй зoнe вoды нeдocтaтoчнo, для пoлнoгo oтвepждeния мaтepиaлa нeoбхoдимo пpeдвapитeльнoe или пocлeдующee нaгнeтaниe вoды.

Упаковка

CarboStop U —10 кг, пластиковая канистра. По согласованию с заказчиком возможна фасовка в другую тару.

Хранение

CarboStop U должна храниться при температуре от -5 до +30°С. При соблюдении температуры срок хранения не менее 12 месяцев.

Рекомендации

Смола CarboStop U должна обязательно прогреваться перед применением не менее 24 часов при температуре не ниже +15°С для дocтижeния oптимaльнoй для пpимeнeния тeмпepaтуpы смолы +15 - +30°C. Необходимо избегать локального перегрева стенок канистр.

Оборудование

компактные одно- или двухкомпонентные насосы с ручным, пневматическим или электрическим приводом и принадлежности для нагнетания: Пакеры / герметизаторы, нагнетательные и сливные шланги, запорные краны, ниппели, соединительные муфты и скобы.

Детали

Product Name

CarboStop U is a one-component, water-reactive resin that foams and cures upon contact with water. It is free from fluorochlorohydrocarbons (FCHCs) and phthalate plasticizers.

Applications

► Stopping water ingress (including seawater)
► Stabilization of loose soils
► Waterproofing during tunnel excavation and construction
► Sealing boreholes and gas drainage wells

Component Description

CarboStop R U is a resin composed of modified isocyanates and additives.

Key Advantages

► High expansion factor compared to two-component resins; CarboStop R U cures only upon contact with water.
► Excellent adhesion properties to all types of surfaces.

Operating Principle

CarboStop U is injected into water-bearing zones through a packer (injector) using a manual pump or an electric/pneumatic pump. Upon contact with water, the resin expands significantly and cures. If there is insufficient water in the area being sealed, pre-injection or post-injection of water is required to ensure complete curing of the material.

Packaging

CarboStop U – 10 kg plastic canister. Alternative packaging sizes may be available upon agreement with the customer.

Storage

CarboStop U should be stored at temperatures between -5°C and +30°C. When stored under these conditions, the shelf life is at least 12 months.

Recommendations

Before use, CarboStop U resin must be conditioned for at least 24 hours at a temperature of no less than +15°C to achieve the optimal application temperature range of +15°C to +30°C. Localized overheating of the canister walls must be avoided.

Equipment

Compact single-component or two-component injection pumps with manual, pneumatic, or electric drive, along with injection accessories such as packers/sealing packers, injection and discharge hoses, shut-off valves, nipples, coupling fittings, and clamps.

Reviews

There are no reviews yet.

Be the first to review “CarboStop R U”

Ваш адрес email не будет опубликован. Обязательные поля помечены *