Water-Based Polyacrylate Dispersion

Applications

Used instead of water when mixing Component B of CarboCryl Hv and
CarboCryl Wv.

Component Description

CarboCryl Plus is a water-based latex dispersion.

Key Advantages

The use of CarboCryl Plus increases the elasticity, tensile strength, and
adhesion of acrylate gels on silicate surfaces. It also increases the
gel’s solids content, reducing gel shrinkage in dry environments. This is
particularly important in areas with high levels of ventilation, such as:

• Joint repair
• Crack sealing

Operating Principle

The required amount of CarboCryl Component B2 is mixed with a small
quantity of water and shaken vigorously until the salt is completely
dissolved. The salt solution is then added to the container of CarboCryl
Plus (B1) and mixed thoroughly.

Packaging

20 kg Canister

Storage

Shelf life: At least 12 months from the date of manufacture when stored in
a dry place at temperatures between +5°C and +30°C in the original
unopened packaging. Protect from overheating and direct sunlight. Freezing
causes irreversible changes to CarboCryl Plus.

Recommendations

For repeated injections, ensure that the gelation time is observed before
each subsequent injection cycle – a minimum of 10 minutes.

Do not use metal mixers for mixing or homogenizing the product. Only
plastic or wooden paddles should be used.

Equipment

The material is injected using specialized two-component pumps designed
for acrylate gels.